diy electronic techno blinky flashy electromechanicalish sometimes artsy projects from my workbench…
NMEA0183
I live near a busy harbour and wanted some dynamic data for my NMEA2000 testing. A DIY AIS receiver seemed like a ideal plan and I had most of the parts in my spare parts pile. Found a site that had a prebuilt Raspberry Pi image and I also found a quick and very cheap way to make your own antennas out of coax and PVC tubing. Mounted it all in a box outside and was soon seeing real-time marine traffic. See this page for all the details: AIS Receiver
My brother in-law bought a sailboat and was having some issues with the mast mounted wind sensor. Not only was it hard to access (it’s over 60 feet high) but the boat uses the NMEA2000 data bus to connect all the instruments. A further complication is that it uses the SIMRAD SIMNET network cabling. I did some research and found a way to make a very cost effective DIY adapter to allow you see the NMEA2000 traffic in real-time using very good free software. Check out my NMEA2000 Testing & Troubleshooting page
© 2023 zappedmyself.com
Theme by Anders Noren — Up ↑